Jun
28
2009






Polycom 501 XML configuration file Example

This file is named by the MAC address of your Polycom SoundPoint IP SIP phone followed by, ‘-phone.cfg’.  In your FTP folder you would have a file for each phone – I have a single phone.  It’s MAC is ‘0004F202734B’; so my phones configuration file would be named, ‘0004f202734b-phone.cfg’.  I believe there are other conventions for naming this file as well.

The example below was used to connect my phone with a VoiceIP Solutions Asterisk PBX.  This example shows just a fraction of the many possible features in this line.  For my purposes, I defined the Asterisk server IP address, and it’s SIP credentials.  I also added the NTP server.  The ‘mwi’ tag refers to ‘message waiting information’, here I set the mailbox(s) I’m subscribing to and the extension to check voicemail.   My Asterisk voicemail menu is extension ‘299’.

0004f202734b-phone.cfg:

<?xml version=”1.0″ encoding=”UTF-8″ standalone=”yes”?>
<!– Example Per-phone Configuration File –>
<!– $RCSfile: phone1.cfg,v $  $Revision: 1.104.2.2 $ –>
<phone1>
<reg
reg.1.displayName=”5555″
reg.1.address=”5555″
reg.1.auth.userId=”5555″
reg.1.auth.password=”2005″
reg.1.server.1.address=”192.168.1.254″
tcpIpApp.sntp.address=”pool.ntp.org”
tcpIpApp.sntp.gmtOffset=”-33600″
>
<mwi
msg.mwi.1.subscribe=”5555″
msg.mwi.1.callBackMode=”contact”
msg.mwi.1.callBack=”299″
>
</phone1>



1 Comment »

  • Seth

    The phones also use this file and will overwrite any configuration made in the file if you either make changes via the browser on the phone or even forwarding your phone to another line. It’s better to create separate files for your config and specify them in your 0004F202734B.cfg file instead.

    Comment | May 13, 2014

RSS feed for comments on this post. TrackBack URL

Leave a comment